A sovereign social network
powered by Bitcoin

Model MD-1G/UA
The Vril Lakhovsky Multiwave Oscillator (MWO), model MD-1G/UA, represents the pinnacle of A & P Electronic Media’s engineering prowess, now in its seventh generation since production began in 2017–2018. Manufactured in Spokane, Washington, USA, under the prestigious Vril product line, the MD-1G/UA, where MD stands for Modulator, 1G denotes the first model’s seventh iteration, and UA signifies Invisible Rays, per authentic U.S. Navy abbreviations, embodies a 100% electrically correct replication of Georges Lakhovsky’s original design, refined through years of relentless innovation in manufacturing processes. This cutting-edge device, one of only two authentic MWOs worldwide, delivers unparalleled performance for researchers exploring longitudinal waves and displacement currents, cementing its status as a groundbreaking tool in frequency research.

Vril: Authentic Lakhovsky Legacy
The Vril Lakhovsky Multiwave Oscillator (MWO), produced by A & P Electronic Media, is a cornerstone of frequency research, delivering a 100% electrically correct replication of Lakhovsky’s original machine. Until around 2012, every device claiming to be an MWO was speculative; Lakhovsky’s production units remained an enigma. European engineers changed this by reverse-engineering surviving MWOs, publishing a report that revealed the true design, debunking underpowered, balanced units with no connection to Lakhovsky’s vision.
An authentic MWO is defined by three inherent imbalances, engineered by Lakhovsky to maximize harmonic generation through frequency clashing:
Differing Coil Turns: The transmitting (TX) coil’s secondary has a slightly different number of turns than the receiving (RX) coil’s secondary, creating wave asymmetry.
Unequal Coil Distances: The transmission distance from the primary coil (on the TX side) to its secondary is tightly coupled but the distance from the primary to the RX secondary is over multiple feet, enhancing harmonic dissonance.
Grounded Phase: One phase is grounded, forcing emissions to split, partially reaching the opposite antenna and partially driving flux downward to ground, crucial to Lakhovsky’s design, unlike balanced units where emissions form a closed loop, “bathing” anything between the antennas.
Devices lacking these features are inauthentic and misrepresent Lakhovsky’s legacy; they have no right to his name. Only A & P Electronic Media (via Vril) and the Croatian manufacturer produce true MWOs.
This MWO can produce up to hundreds of thousands of volts, with an adjustable, quadruple spark gap facilitating the transmission of longitudinal waves via electrostatic propagation. Its development reflects a unique genealogy: Bob Beck popularized the MWO through talks, George Van Tassel’s Integratron was inspired by it, Peter Lindemann and Eric Dollard studied speculative MWO theories at Borderlands (without a working unit), and Paul Babcock built a homemade version from the 2012 report. Inspired by Babcock’s unit, A & P Electronic Media produced it, with input from Lindemann and design/refinement by Dollard, who created the Golden Ratio PCB antenna. Beck’s past funding of Dollard and Dollard’s Integratron work add to this unmatched lineage.
Assembly takes ~10 minutes with one person, with a walk-through tutorial available for ring/PCB antenna and oscillation transformer use. This video shows the ring antenna setup, the PCB antenna setup and the oscillation transformer setup.

Never turn on the pulse modulator unless the antenna cable system is fully hooked up and plugged in.
Default: unbalanced mode
No OT. Both coil cables run straight to the back of the pulse modulator, plus a ground wire from an earth rod. Nothing goes in the green jack.
A1: Unbalanced, front view. Cables run to the back of the modulator.

A2: Unbalanced, from behind. Rear caps, plugs, and the cables landing on the back panel.

A3: Unbalanced, back panel. Green jack stays empty.

Balanced mode: with the oscillating transformer
The OT sits on top of the modulator as a balanced, centre-tapped primary, bypassing the primary on the TX coil.
B1: Balanced, front view.

B2: Balanced, from behind. OT on the modulator, everything landing on the back panel.

B3: Balanced, OT to back panel. Rear view.

What’s Included:
1 x Pulse modulator
1 x Cable set
2 x stand platforms
2 x upright stand poles
1 x TX coil (with mounting for either copper ring or pcb antenna)
1 x RX coil (with mounting for either copper ring or pcb antenna)
2 x Copper Ring OR PCB Antenna
OPTIONAL – Oscillation Balanced Transformer
OPTIONAL – 120VAC, 60Hz, True Sinewave Inverter (to run the MWO in 50Hz countries from a 12v deep cycle battery)
NOTE: The PCB version costs less than the ring antenna version but the power cannot be turned up as much because it can cause too much corona that will break down the masking on the PCB antenna.

The True Design RediscoveredHistorical Context
Georges Lakhovsky was captivated by high-voltage electrostatic phenomena, experimenting in the early 1900s with oscillating frequencies to explore effects on plants and soil conductivity. Using the Earth-ionosphere voltage gradient (~100 volts/meter), he grounded plants with copper rings, observing responses that fuelled his curiosity. This curiosity led to the Multiwave Oscillator, generating longitudinal waves via electrostatic propagation even though he may not have understood the nature of these waves. Numerous online resources detail Lakhovsky’s work for further study. His production machines diverged from his patent, misleading imitators who built inauthentic variations.
The 2012 reverse-engineering report was a breakthrough, revealing the three imbalances: differing coil turns, unequal coil distances, and a grounded phase. The grounded phase, driving flux to Earth, set Lakhovsky’s design apart from balanced units with closed-loop emissions. These details, absent from the patent, were unknown until then, exposing prior replicas as incorrect. The Vril MWO brings this authentic design to researchers, with historical references for educational purposes only.

Grounding cable goes to back of pulse modulator phase 2 connection and into the ground on an outlet (dedicated ground rod is best).
The Vril MWO is engineered for studying longitudinal waves and displacement currents, offering:
High Voltage Output: Up to hundreds of thousands of volts, with an adjustable spark gap for transmitting longitudinal waves via electrostatic propagation between the antennas.
Antenna Options:
Copper Ring Antenna: Bent to Lakhovsky’s BV2 specs; coil mounting adapted for rings.
Golden Ratio PCB Antenna: Designed by Eric Dollard; coil mounting adapted for PCBs.
Coil Design:
TX secondary: Different turns than RX secondary.
Primary-to-secondary distance varies between TX and RX.
Multiple layers of dielectric coating protect high-voltage windings.
Grounded Phase: Splits emissions, part to the opposite antenna and part to ground, forcing flux downward.
Stands: Two platforms and two upright poles, furniture-grade tubing for looks and stability.
Oscillation Transformer: Optional, engineered by Dollard, for balanced mode experiments like the Cosmic Induction Generator.
Power Requirements: 110V 60Hz; optional inverter for overseas use.
Assembly: ~10 minutes with one person; walk-through tutorial YouTube video posted above.
1-Year Guarantee: Repair/replace within one year; no-refund policy, voided if opened without authorization. After 1 year, we can repair/replace very close to our actual cost.

Lakhovsky MWO with copper ring antenna

Lakhovsky MWO with PCB Antenna
Research Applications
The Vril MWO is ideal for experiments with longitudinal waves and displacement currents in different systems:
Plant Studies: Explore grounded flux effects on growth or conductivity, inspired by Lakhovsky’s copper-ring tests, contributing to electroculture research.
Water Research: Investigate resonance or structuring driven by downward flux, probing electrostatic interactions with aqueous systems.
Harmonic Analysis: Study clashing harmonics from the three imbalances, using oscilloscopes or spectrum analyzers for philosophical or recreational insights.
Electrostatic Exploration: Experiment with electrostatic propagation, leveraging the grounded phase to study wave behavior in gases, solids, or other media.
Users must comply with all applicable laws and understand local regulations where the device is operated, ensuring responsible research practices.

Damaged plant before exposure to MWO – Jelmer U., Netherlands

Plant is thriving 24 days after exposure to MWO – Jelmer U., Netherlands
Technical Specifications
Output Voltage: Up to hundreds of thousands of volts.
Waveform: Longitudinal waves with displacement current, via electrostatic propagation, driven by three imbalances, forcing flux to ground.
Frequency Range: Adjustable via spark gap and antenna.
Antenna: Copper rings (BV2) or Golden Ratio PCB, with adapted coil mounting.
Materials: Coils with multiple layers of dielectric coating; stands from furniture-grade tubing.
Power: 110V 60Hz; optional inverter for overseas use.
Why Choose the Vril MWO?
Unmatched Authenticity: One of two true MWOs, validated by the 2012 report.
Rich Genealogy: Rooted in Bob Beck’s popularization, George Van Tassel’s Integratron inspiration, Peter Lindemann and Eric Dollard’s speculative Borderlands studies, and Paul Babcock’s homemade MWO. Lindemann’s input and Dollard’s design (including PCB antenna and Integratron work) were key, with Beck’s past funding of Dollard adding to this unique lineage.
Research Focus: A tool for exploration, not guaranteed results.
Made by A & P Electronic Media: Crafted in Spokane, Washington, under Vril.
This MWO’s lineage, tied to Beck, Van Tassel, Lindemann, Dollard and Babcock, establishes it as the most authentic continuation of Lakhovsky’s principles, tracing back to when few understood the MWO.

This page is for the continuing research  of John Bedini 

 
My research takes many hours to be able to share with the groups and the public which I have done over the years without asking for anything.
If you want the DVD'S on my work then please go to  http://energyfromthevacuum.com/disc1.htm            
My research continues on with:
SSG
Zero Force Motor
Crystal Batteries
Linear Regulators
The Tesla Switch
The New RPX Unit
Updating my Lab notes and drawings to be placed on the internet.
 
 Looking at some of my research that is on going.

For more information on RPX
Click image for DVD

Click on image for DVD

 

Click on Image

The Cejka Files

Tom Bearden and John Bedini pulse charging the battery with high voltage
Known as Battery Back-popping

The Pendulum

The Crystal Battery

Structure of the Schappeller Device
First developed in Germany. After the Second World War two different sciences developed called "Physics". One was the relativism taught in schools. The second more esoteric type wasutilized only secretly, by the secret government, for deep blackprojects.
According to Davson's description upon which we will rely, the Schappeller device is really composed of two separate units, the rotor and the stator. The stator is constructed as follows: Its surface is round or ball-shaped, being composed of two half-shells of steel. These half-shells contain the internal structure and are air tight. Attached at each "pole" of each half-shell is an iron bar magnet, most of whose structure is internal. This means that the bulk of the magnet is inside the steel ball, one opposite the other. There is a space between thetwo bar magnets at the very center of the sphere.
Insulation, a ceramic material, is placed on the inside of the steel ball leaving a hollow central area. Within this hollow area and around the space between the magnets are wound two internal coils. These originate at the bar magnet poles and each terminates at the center of the sphere with a connection leading out of the sphere to the rotor. These coils are composed of a hollow copper tube filled with a special and secret substancecalled the "electret". Upon leaving the sphere the electret filled copper tubes are replaced by conventional copper wire. An electrical connection is made from the outside surface of one pole to one pole of a special type of battery which is grounded at the other pole or, as an alternative, to a special device called an "Ur-machine" which will be discussed.
This electret is a permanent magnet within the sphere. This type of magnetism is not identical with ferro-magnetism or electromagnetism, it is much stronger . The actual composition of Schappeller's electret remains a secret but another electret  has been made by Professor Mototaro Eguchi. It consists of carnauba wax and resin, perhaps also containing some beeswax. It was kept in a strong electric field while baking slowly until it solidified. For purposes of production of Schappeller spheres, a complete electret manufacturing plant would have to be set up which had no parallel in present science .
Before being set into operation, all the air is pumped from the hollow core of the sphere. This whole ball is mounted on aswivel mechanism so that the poles can be moved from the vertical to the horizontal. The stator is completely unattached from the rotor. The stator can function without the rotor and the stator is capable of producing electrical energy without the rotor. The rotor could also be used to generate additional electrical energy.
The rotor consists of: A steel wheel of special design fixed on
For an understanding of what is really happening here we have to consider the bar magnet. We think of a bar of iron with two poles, one positive and one negative or perhaps one north and one south pole. But there are really three components to the bar magnet. There are the two poles and the neutral zone between the poles If we cut the magnet in half we get two new poles. For the Schappeller this neutral area is very important. Imagine a barmagnet running through the vertical axis of the ball. Then imagine the center section cut out. We now have a north pole at the top of the ball, a south pole at the bottom of the ball just as we do with the planet Earth. In the center we have a missing section with a south pole, opposing the north pole at the top ofthe ball and, likewise, a north pole opposite the south pole at the bottom of the ball. We have now four poles and a split barmagnet with a gap in its center section.
It is this gap in the center where Schappeller's "glowing magnetism" is generated by grounding, that is, charging the device via a special battery and an earth connection. This glowing magnetism is the mystery.Davson cites Schappeller's calculations and gives this form of magnetism as being one thousand times more powerful than that produced by present magnetism . He also states that in this form of magnetism the electricity is stationary while the magnetism is radiated .
To repeat again, Davson contends throughout his book that this glowing magnetism is not found in secondary physics, that is, in modern physics, and that this glowing magnetism is a manifestation of primary physics. As a phenomenon of primary physics, it is responsible for and can generate heat, electricity and magnetism.
After initial stimulation and in a state of glowing magnetism, no further input of energy is needed from the battery. The deviceis able to draw in energy to it directly from the surrounding aether, bind this energy though its magnetic electret material, that is the filling in the hollow copper coils of the internal coil, and then re-radiate energy producing heat, electricity,magnetism or mechanical work depending upon the application.
Stated another way, this is an implosion device and it is described as such . Unlike the Schauberger device which is associated with the word implosion, the Schappeller device operates purely at the energetic level. Energy is drawn towards the center, through the magnets, into the field of glowing magnetism, and then radiated outward.
The first explanation for this output of radiant energy involves the concept of the Bloch Wall. A Bloch Wall is defined by Van Norstrand's Scientific Encyclopedia, 1958 edition, pages 201 and 202, as follows:
"This is a transition layer between adjacent ferromagnetic domains magnetized in different directions. The wall has a finite thickness of a few hundred lattice constants, as it isenergetically preferable for the spin directions to change slowly from one orientation to another, going through the wall rather than to have an abrupt discontinuity".
In electromagnetics the Bloch Wall is external to the hardware itself. It is the point of division of the circling vortex, or spin, of the electronic magnetic energies of the north and south poles. The negative north pole magnetism spins to the left while the positive south pole spins to the right. Energy is being conducted into the Schappeller device through the un-insulated poles and being conducted and spun on its way to the center of the unit. The point of zero magnetism, no spin and magnetic reversal, where the two spin fields join, is the Bloch Wall .
Most of us have heard of the two Thermodynamic Laws. These are laws of heat. The First Law of Thermodynamics states that energy is conserved, meaning that the total amount of energy in the universe always remains the same. This is no surprise for most of us and it is not the real concern here.
What is of concern is the Second Law of Thermodynamics which discusses heat and entropy. The word entropy might be thought of as a state of randomness or chaos. Negative entropy would then mean movement toward the less random or the more ordered in any particular thing. If we apply this to a system, then entropy tends to increase until the system breaks down in utter chaos
This will occur unless the system is re-charged with additional outside energy. A concrete example is less confusing.
Imagine a new automobile just coming off the assembly line. It has taken a great deal of energy to find, refine, forge, weld,and paint the metal parts of this car alone. This same concept also applies to all the other components of the car. This energy and organization constitute a highly organized state, or, said another way, a state of negative entropy.
What happens next illustrates entropy. The car is purchased. Whaether it is driven hard or just sits in the garage does not matter in the long run because what happens to the car is that it starts to fall apart. This change may be small at first and may only occur at the molecular level, but it occurs nevertheless.The engine, transmission, paint, rubber, electronics, etc. all will fail with time. Even it the car just sits in the garage, in a thousand years the metal will eventually oxidize. Finally, the car rusts away forming a reddish brown heap. This is exactly the opposite of the organization and energy used to put the car togaether. This disorganization is entropy. The only thing which will reverse this, as we all know, are additional inputs of energy by the owner in the form of maintenance and repairs.
All things in a relative state of relative order move toward a state of disorder. In terms of heat, heat will always flow into a colder place from a warmer place. When something is heated there is a rise in its entropy. With increasing heat its molecules move faster and faster in random chaos as a bomb does when it explodes. Increasing heat means increasing randomness and chaos which is entropy. Cold, then, can be seen in terms of negative entropy. Any cold object is simply more organized and less random than the same object once it is heated.
Schappeller had something to say about the Second Law of Thermodynamics. He said there was another and unknown thermodynamic cycle which runs opposite the Second Law.  We will call it  "Reverse Thermodynamics".   It is the reverse of the Second Law of Thermodynamics in that it leads to an increase in entropy. Not only is there an increase in order but there is an increase in cold! Schappeller, according to Mr. Watson's letter, built his spherical device primarily to demonstrate the principles behind this Reverse Thermodynamics. It was not designed as a practical machine.